PRIMERS

P-70™ PRIMER (Clear or Purple)

• Premium industrial strength primer essential for proper softening and preparation of PVC and CPVC pipe and fitting surfaces.
• Specially recommended for use on Schedule 80 (PN 10 and higher) and large size pipe.
• Excellent for cold weather applications.

REPAIR AND FABRICATION ADHESIVES**

810™ (White)

• Thick syrupy, two-component, high strength reactive adhesive.
• Product can withstand very high pressures and is high impact resistant. Great for repairing cracks or leaky pipe valves and fittings.
• Excellent gap-filling properties. Ideal for fabricating fittings and joining saddles to pipe. Good for bonding large diameter PVC and CPVC pipe and fittings.

845™* (White)

• Thick syrupy, two-component, high strength reactive adhesive. Same formula as 810, but different packaging format.
• Product can withstand very high pressures and is high impact resistant. Great for repairing cracks or leaky pipe valves and fittings.
• Excellent gap-filling properties. Ideal for fabricating fittings and joining saddles to pipe. Good for bonding large diameter PVC and CPVC pipe and fittings.
• Conveniently packaged in a dual cylinder cartridge for easy dispensing and application to the bonding surfaces.

NOTE:
* Special Order Only
** The following Weld-On adhesives have Low voe emissions per SCAQMD Rule 1168. Use of these products can qualify for one credit in the LEED® Green Building Rating System – Indoor Environmental Quality.

ROLL-A-WELD ROLLERS. SWABS 6 BRUSHES

SuperSwab: See next page

SuperSwab for 4-24″ pipe

3020MT653
Roll-A-Weld 3″ roller for pipe diameters from 3″ through 6″; fits MT-653 empty quart triple tight neck can.

5020
4″ swab for pipe diameters from 3″ through 8″; fits standard quart can as well as MT-651 empty quart can.

7020MT648
Jumbo Roll-A-Weld 7″ roller for pipe diameters of 6″ or larger; fits MT-648 gallon can and cements available in wide mouth cans.

PB-I Brush: 0000600
Plastic Handle Brush; fits standard pint and quart cans.

4020
4″ swab for pipe diameters of 6″ or larger; fits MT-648 empty gallon can and cements available in wide mouth cans.

6020MT651
Roll-A-Weld 4″ roller for pipe diameters from 3″ through 8″; fits standard quart can as well as MT-651 empty quart can.

8020
4″ cotton swab with wire handle for use on pipe diameter 6″ or larger.

DAUBERS

Can-Mate daubers: CM-75 or CMl50
Adjustable plastic applicator with telescoping  stem to fit ½ pint, pint, and quart cans. Available in ½”, ¾” and 1 ¼” dauber sizes.

Cap daubers: 000016
DH Daubers fit ¼ pint & ½ pint cans; DP daubers fit ½ pint & pint cans; DQ daubers fit quart cans. Available ¾” dauber sizes.

ACCESSORIES

Empty Metal Cans (dauber not included)

MT-648
Gallon can with 2 7 /8″ neck

MT-651
Quart can with l¾” neck

MT-653
Quart can with triple tight neck (paint style)

MT-654
Pint can with 1¾” neck