Chemical & Corrosion Resistant CPVC
One of the key advantages of the LabWasteTM CPVC system is its excellent resistance to a broad range of corrosive environments. CPVC is inert to most mineral acids, bases, salts and aliphatic hydrocarbons, and compares favorably to other non-metals in these chemical environments.

The LabWaste™ CPVC System has been developed for use in academic, research, and institutional laboratory chemical waste drainage applications, which is the routine disposal of a wide variety of hot and cold chemicals accompanied by water for the purpose of dilution and flushing.

Full Assortment of Drainage Pattern Fitting Configurations
Spears® broad line of LabWaste™ CPVC fittings are produced in ASTM D 3311 and other drainage patterns required in corrosive waste system installations. Standard configurations are available in nominal sizes of 1-1/2″ through 24″ with many specialty fittings.

NSF Certified For Corrosive Waste
Spears® LabWaste™ CPVC Corrosive Waste Drainage System of pipe, fittings, and cement is tested and certified for use in corrosive waste systems by NSF International, tested to IAPMO JGC 210 and ICC-ES AC252 for CPVC Chemical Waste Systems.

Cost Saving Solvent Weld Joining Eliminates Troublesome Electro-Fusion and Mechanical Connections
A proven joining method reliably used for over 50 years, Solvent Cement Welding requires no special tools, no costly fusion equipment, and provides a solid, chemically bonded joint for easy installation, repairs or alterations. Most importantly, solvent cement joints end problems typical of polypropylene system installation, such as mechanical connector pullout, maintenance on elastomer sealed joints, internal fusion wire corrosion, and cumbersome fusion joining methods. Saves time, saves cost, saves worry!

ULC Flame & Smoke Rated Components
Spears® LabWaste™ system components have been evaluated as finished products for surface burning characteristics of flame spread and smoke density by Underwriters Laboratories of Canada under standard test method CAN/ULC S102.2-M88.

Product Certification (3rd Party Approval Standards)
Spears® LabWaste™ CPVC Corrosive Waste Drainage System is a complete system of pipe, fittings and solvent cement. Since specific ASTM Standards have not been developed for CPVC corrosive waste systems, Spears® LabWaste™ CPVC pipe and fittings are tested and certified for use in corrosive waste systems by NSF International as a Special Engineered (SE) product. Spears® LabWaste™ CPVC system meets the requirements of IAPMO JGC 210 and ICC-ES AC252 for CPVC Corrosive Waste Drainage Systems.