Snyder’s revolutionary Captor Containment System is designed to alleviate the ever-changing environmental and safety concerns regarding bulk chemical storage and containment for the 21st century. Captor’s unique tank-in-a-tank design enables users and specifiers to incorporate advanced performance and safety features on a bulk-handling system , which provides total containment protection. Captor’s double-wall construction is completely enclosed so that external matter, such as dust, rain and snow is prevented from collecting in the outer containment tank. Besides delivering unparalleled performance benefits, Captor Containment Systems also contribute to your company’s bottom line by significantly reducing installation and procurement cost. Captors are shipped fully assembled on either a standard or wide-load flatbed trailer, which reduces comparable costs by an average of 35 percent.

Flanged Outlets and other fitting designs can be securely fastened and sealed to many of the large flat areas located on the top section of the tank (optional).

U-Vent Assemblies are available in a variety of sizes —- to relieve vacuum pressures.

Fill and/or Draw Pipe Assemblies can be installed to facilitate different material loading or un-loading requirements. (optional).

U.F.O. (Unified Fitting Outlet) is uniquely designed to mechanically seal fitting outlet through both the inner and outer tank walls. Material unloading is easier and more cost effective than pumping contents from the top of the tank (optional).

Bolted and Threaded Manways are available in sizes up to 24″. Standard size is an 18″ threaded manway.

OSHA Approved Ladders are available with and without cages in fiberglass and steel construction.

Molded in Tie-Down Lugs interface with optional cable restraint system to meet seismic and 150 mph wind load requirements.

Outer Containment Tank provides 115-120% of inner tanks capacity for added safety factor. Complies with 40 CFR-264.193.

Double Wall Tank Construction encloses and interlocks outer and inner tank to prevent rain, snow, and debris from entering outer containment tank.