CHECK VALVES

Series CKM
Patented design closes automatically, requires no reverse pressure½”,¾”, 1″ PVC, CPVC, GPP, PVDF, PTFE

Series CKS
Isolated spring closes valve automatically, requires no reverse pressure 1 ½”, 2″, 3″, 4″
PVC, CPVC, PP, PVDF

Series CKD
Specialty diaphragm design opens with virtually no forward pressure ¼”,½” PVC, PP, PVDF, PTFE

VACUUM BREAKERS

Series VBM
Patented design closes automatically, requires no reverse pressure½”,¾”, 1″
PVC, CPVC, GPP, PVDF, PTFE

Series VBS
Isolated spring closes valve automatically, requires no reverse pressure 1-½”, 2″, 3″, 4″
PVC, CPVC, PP, PVDF

RELIEF, BY-PASS & BACKPRESSURE VALVES

Series RVOT/RVOTM
PTFE diaphragm design has no wetted elastomers; 1st State­approved thermoplastic anti­siphon valve; superior performance and cycle life. I nline flow pattern¼”,½”,¾”, 1″, 1 ½”, 2″, 3″, 4″ PVC, CPVC, PP, PVDF, PTFE, SS

Series TRVOT
3-port valve, Pm diaphragm design has no wetted elastomers; simplifies piping
½”, ¾”, 1″
PVC, CPVC, PP, PVDF, PTFE,

Serles RVT/RVTX
Angle flow pattern with PTFE shaft. High flow rates in a design proven for over 50 years
½”, ¾”, 1″, 1 ¼”, 1 ½”, 2″, 3″ PVC, CPVC, PP, PVDF, PTFE

Serles RVO
Angle flow pattern with PTFE spring guides. Compact, rugged design ¼”, ½”
PVC, CPVC, PP, PVDF, PTFE

Series RVOM
lnline pattern with ultra smooth
flow performance, light weight ½”, ¾”, 1″
PVC, CPVC, GPP, PVDF

HIGH PERFORMANCE PRESSURE REGULATORS

Series PRH/PRHM
Rolling diaphragm, extended shaft and multiple spring design is the industry standard for thermoplastic pressure regulators. Set pressure range from 5 to 125 PSI on most models.
¼”, ½”, ¾”, 1″, 1 ½”, 2″, 3″, 4″
PVC, CPVC, PP, PVDF, PTFE

Series PRA
Air-piloted design provides superior flow with industry’s lowest drop-off from set pressure (droop). Set pressure range from 5 to 125 PSI.
¼”, ½”, ¾”, 1 •. 1 ½”, 2″, 3″
PVC, PP, PVDF

Serles PRS
Optional patented Stabilizer is used with Series PRA. The Stabilizer reacts to downstream liquid pressure and provides continuous feedback control to the compressed air supply, for the ultimate regulator sensitivity and performance. PVC, PP, PVDF, PTFE

Series PRO/PROM
Differential pressure regulator eliminates overpressure across a bank of filters, etc. via tubing connected downstream. Set range to 50 PSI.
¼”, ½”, ¾”, 1″, 1 ½”, 2″, 3″
PVC, PP

ULTRA PURE PRESSURE REGULATORS

Series PRHU
Kynar machined body with metal ion-free EPDM rolling diaphragm, IPS or metric spigot connections.
Highest flow performance in ultra- pure valve with 10 to 125 PSI set range.
½” – 3″ or 20 mm – 90 mm
Kynar 740 PVDF

Series UPR
Kynar machined body with no wetted elastomers; variable area PTFE diaphragm provides excellent pressure response.
UPR is a non-shutoff design with 5 to 100 PSI set range.
¼” NPT or Flare; PVDF or PTFE 20, 25, 32, 50, 63mm spigot; PVDF

PROCESS COOLING WATER STICK

Serles PCWS
Supply side slick strengthens piping and reduces installation costs. Configurations include options with or without ball valve, diaphragm valve, y-strainer, pressure regulator, pressure gauge, Tridicator,
and a variety of connection types.
½”, ¾”, 1″, 1 ½”, 2″
PVC,CPVC

Serles PCWR
Return stick strengthens piping
and reduces installation costs. Configurations include options with or without ball valve, diaphragm valve, flow meter, pressure gauge,
Tridicator, and a variety of connection types. ½”, ¾”, 1″, 1 ½”, 2″
PVC,CPVC

SOLENOID VALVES

Series EASYMT/EASMT
Normally-closed design/energize to open. Million-cycle design featuring PTFE bellows; direct acting. Available with choice of rectified coil or rectified “Z-Cool” energy saving 24 watt coil. 120/60, 24/60, 240/60 AC or 24V DC¼”,½”,¾”, 1″ sizes with ¾” – 1½6″ main orifice
PVC, CPVC, GPP, PVDF

Series EAST
Compact, normally-closed design/energize to open. Multimillion-cycle design featuring PTFE bellows; direct acting. Available with 11 watt, NEMA4X coil.
120/60, 24/60, 240/60, 230/50 AC or 24V DC ¼”, ½” sizes with ¾6″ or¼” main orifice
PVC, PP, PVDF

PS
Pilot-operated, normally-closed design/energize to open. Million­cycle high flow rate valve features PTFE bellows; require pressure differential to function. Available with 11 watt, NEMA 4X coil.
120/60, 24/60, 240/60, 230/50 AC or 24V DC ¼”, ½”, ¾”, 1″, 1 ½”, 2″, 3″
PVC, CPVC, PP, PVDF

SIGHT GLASSES & LEVEL INDICATORS

Series GX
Single-wall sight glass for liquids compatible with acrylic. Fluttering streamers optional.
½”, ¾”, 1″, 1 ¼”, 1 ½”, 2″, 3″ PVC, PP

Series GYW
Double-wall sight glass for liquids compatible with Pyrex inner wall. Flange connections; fluttering device optional.
1 ½”, 2″, 3″, 4″, 6″, 8″
PVC, CPVC, PP, PVDF, PTFE

AIR RELEASE & DEGASSING VALVES

Series ARV
Provides rapid expulsion of air at start-up; seals bubble-tight while system operates. Dust cap optional.
½”, ¾”, 1 “, 1 ¼”, 1 ½”, 2″, 3″, 4″ PVC, CPVC, PP, PVDF

Series DGV
Provides continuous venting of trace amounts of air/gas as it occurs during system operations. ½”
PVC, CPVC, PP, PVDF,
Clear Acrylic

Series CARD
Combines ARV initial volume venting & DGV continuous trace venting in one unit.
1″, 2″, 4″
PVC, CPVC

PULSATION DAMPENER/ SUPPRESSOR

Series PDS
Performs six functions to improve system performance: Pulsation Dampener smooths pump flow, Surge Suppressor absorbs vibrations, Water Hammer
Arrestor, Inlet Stabilizer enhances pump operation, Accumulator releases stored fluid during unwanted pressure drops, Expansion Tank protects system from thermal volume increases. 1 o, 50 and 180 cubic inch capacity in
1 “, 2″, 3” connection, respectively.
PVC, CPVC, PP, PVDF

SHUTOFF VALVES

Series BSDA/BSDAM
Air operated, compact PTFE diaphragm valve for drain applications and pressures to 100 PSI.
¼”, ½”, ¾”, 1″, 1 ½”
PVC, CPVC, PP, PVDF, PTFE

Serles BSR/BSRM
Air operated, balanced shaft design assures bubble light shutoff with automatic spring return.
½”, ¾”, 1″, 1 ½”, 2″
PVC.PP

Series MFR
Hand or foot operated manual valve. Press to open, automatic spring return closure.
½”, ¾”
PVC

Series HSA
Air operated pinch valve ideal for slurries or particulate. EPDM sleeve closes bubble-tight around media.
½”, ¾”, 1″
PVC, CPVC, PP, PVDF

FLOW CONTROL VALVES

Series FC
Internal diaphragm and orifice plate maintains constant, pre-set flow despite pressure fluctuations. Flow rate is tamper-proof and available from ¼ GPM to 120 GPM.
¼”, ½:”, ¾”, 1″, 1 ¼”,
1 ½”, 2″, 3″
PVC

GAUGE GUARDS & INSTRUMENTATION

Series GGS
Heavy duty instrument isolator; ½” process connection with steel reinforced ¼” instrument connection. Available with or without pressure or vacuum gauges. Standard instrument has 2 ½” gauge face with stainless steel case. Options include center back mount, acrylic shield for harsh environments, snubber, liquid filled face.
PVC, CPVC, GPP, PP, PVDF

Series SWT
PTFE diaphragm pressure switch features no wetted metals or elastomers. 16, 25, or 3 Amp models.
PVC, CPVC, PP, PVDF

MANUAL BALL VALVE OPTIONS

Series MBVL
Lock out/tag out option. Available factory complete or as kit for retrofit.
All sizes/materials for Series MBV.

Series MBVM
Metering indicator shows degrees open. For use with regular or characterized ball valve, factory complete or as kit for retrofit. Series MBV sizes to 2″ in all materials.

Series MBVSE
Stem extension from 2″ to 12″. Factory complete or as kit for retrofit.
Series MBV sizes to 2″ in all materials.

ACTUATED BALL VALVES

Series ABVNABVS
Air x air or fail-sale air x spring actuator for Series MBV, 3/8″ -1″ sizes. Thermoplastic construction, includes direct manual override. Options include limit stop and limit switch.

Series ABRNABRS
Air x air or fail-safe air x spring actuator for Series MBV, 1 ¼” to 4″ sizes. Thermoplastic construction, most models include direct manual override 3″ & 4″ designs features stainless actuator. Options include limit stop and limit switch.

Series EPP
Electro-Pneumatic Positioner turns any air actuated True Blue valve into an electronic control valve. Requires ABRA/ABRS actuator for all sizes.

Series TABVA/TABRNS
3-way air actuated valves, air x air or fail-safe air x spring versions for Series TMBV.

MANUAL BALL VALVES

Serles MBV
The engineered ball valve features trunnion ball design, dual shaft seals, large diameter shaft, mounting lugs, PTFE seats, and perfectly spherical ball. Will ouUive any competitive ball valve. NPT, socket, BSP or metric socket.
¾”, ½”, ¾”, 1″, 1 ¼”, 1 ½”, 2″, 3″, 4″
or 20-110 mm
PVC,CPVC, P􀁒 PVDF

Series TMBV
Three-way version of Series MBV with same trunnion design and features. 2-hole or 3-hole option. ½”, ¾”, 1″, 1 ½”, 2″, 3″, 4″ PVC, CPVC

Serles LMBV
Lateral reducing ball valve based on Series MBV; simplifies and strengthens lateral drops. Includes tee.
½”, ¾”, 1″, 1 ½”, 2″ valve
¾”, 1″, 1 ½”, 2″, 3″ tee
PVC, CPVC, PP, PVDF

MANUAL & ACTUATED BALL VALVE OPTIONS

Flange Connections
Available for most sizes and materials, 2-way and 3-way.

Sanitary Connections
Available for 2-way valves, ½” through 2″ in PP, PVDF.

Z-Vent Balls
Designed for sodium hypochlorite and other applications prone to dangerous outgassing. Vent allows trapped liquid and resulting gas to escape harmlessly downstream.

ZC Control Balls
Specific angles or special linear cut enables precise control of flow rates for manual valves, or for actuated valves with electronic positioning. All 2-way sizes and materials.

BASIKS PRODUCT LINE

Value line of commodity products, manufactured to Plast- 0-Matic specifications, with complete technical support. One year warranty. Most products offered with NPT, socket, metric socket, BSP or JIS. PVC & CPVC standard; most items also available in PP, GPP & PVDF.
• Manual & Actuated Butterfly Valves and Ball Valves
• Ball Checks
• Weir Style Diaphragm Valves
• PTFE Diaphragm Backpressure Valves
• Wye Strainers
• Mini Gauge Guards
• Flow & Level Switches
• Solenoid Valves

Series GGME
Compact, low-cost diaphragm seal in polypropylene.
Buna-N or Viton seals. Available with or without pressure gauges; suitable for use with virtually any pressure
instrument that requires protection from ullrapure or corrosive liquid. Accuracy to within ±4%

Serles S-RV
PTFE diaphragm valve serves as relief valve, pump backpressure valve, backpressure regulator, bypass valve, or anti-siphon valve. Excellent corrosion resistance and well suited to ultrapure processes. Regulates backpressure from 5 to 150 PSI set. 1/4″, 1f.2″, 3/4″ and 1″ in PVC, CPVC, GPP, PVDF.

Series S-SV
PTFE bellows design with no wetted metals is suitable for inlet pressure to 140 PSI, backpressure to 80 PSI. 24, 120 or 240V coil. 1/4″ or 1/2″ with 1/4″ orifice in PVC, CPVC, GPP, PVDF.