FLEXFLO® A-100N Peristaltic Metering Pump

Products

Pumps & Filtration

LOOKING FOR A METERING PUMP THAT’S SIMPLE TO OPERATE and also provides Accurate, Dependable Chemical Feed? FLEXFLO® A-100NV delivers. This compact and cost-effective peristaltic pump is compatible with a wide range of chemical and the low velocity injection system of peristaltic pumps provides gentle and efficient pumping action with No vapor lock, No lost prime.

OVERVIEW
• Patented TFD (Tube Failure Detection) system protects against chemical spills from a worn out tube and activates an alarm output relay.
• Self-Priming against maximum line pressure.
• Cannot Vapor Lock or Lose Prime.
• Four pump tube material options: Norprene•, Norprene• Chemical, Tygothane•, and FKM.

WHAT’S INCLUDED
• A-lO0N Peristaltic Metering Pump
• Two tube assemblies
• Discharge injection fitting with check valve
• Suction tube – clear PVC – 5′ length (3/8″ OD, 1/4″ ID)
• Suction strainer
• Suction ceramic weight
• Discharge tube – opaque polyethylene – 5′ length (3/8″ OD, 1/4″ ID)
• Display shield
• Tube nuts (x2)
• Mounting hardware

Max. working pressure:
A-lO0NV and A-l00NF: 100 psig (6.9 bar)
A-l00NVP and A-l00NFP: 65 psig (4.5 bar)

Max. fluid temperature:
130″ F (54″ C)

Max. ambient temperature:
14″ to 110· F/ -10· to 4″3 C

Duty cycle:
Continuous

Maximum viscosity:
5,000 Centipoise

Maximum suction lift:
30 ft. Water 0 psig

Maximum Solids:
50% by volume

Enclosure:
NEMA 3R, (IP23)

Output adjustment range:
14 & 30 RPM with -lT, -2T, -4T tubes: 5-100% (20:1 turndown) All other models: 10-100% (10:1 turndown)

Voltage (amp draw):
115VAC/60Hz, lph (.350 amp max) 230VAC/60Hz, lph (.173 amp max) 220VAC/50Hz, lph (.175 amp max) 240VAC/50Hz, lph (.193 amp max)

Power Cord Plug Type:
115V60Hz = NEMA 5/15 (USA) 230V60Hz = NEMA 6/15 (USA) 220V50Hz = CEE 7/VII (EUROPE) 240V50Hz = CEE 7/VII (EUROPE)

Approximate shipping wt:
12 lb. (5.4 kg)