Finish Thompson - SP Series Self-Priming Magnetic Drive Pumps

Products

Pumps & Filtration

FTl’s SP Series Magnetic Drive Self-Priming Pumps are the product of advanced engineering CFD design software and superior magnetic flux technology. The SP Series combines deep-lift capabilities and lightning-fast priming with the advantages of neodymium magnetic drive technology and corrosion resistant polypropylene and PVDF to handle the most difficult applications with no seal replacement, no leaks and the capability to run-dry without damage.

• Big on power- short on energy consumption
• Deep-lift capabilities (up to 25’/7.6m)
• Lightning-fast priming (18’/5.5m in 90 seconds)
• Ease of operation
• No seal replacement and no leaks
• Corrosion-resistant materials handle the most difficult applications
*Threaded (NPT or BSP), flanged or union connections

• Up to 70% operating efficiency
• High working pressure up to 90 psi/6.2 bar
• Maximum viscosity:
– Up to 50 cP
• Maximum temperature:
– Polypropylene – 180 ° F (82 ° C)
– PVDF – 220 ° F (104 ° C)

• SP retains fluid for re-priming when shut off without a check valve
• SP lifts up to 25′ (7.6ml
• SP primes up to 18′ (5.5m) in 90 seconds

• Sumps
• Underground storage tanks
• Rail cars and tanker trucks
• Over-the-wall applications
• Double containment tanks
• Piping systems that tend to have trapped or entrained air

Model	Max Flow (GPM)	Max Head (ft)	Suction/Discharge	Impeller Diameter	RPM (60Hz)	HP Requirement*
SP10	38-53	25-63	1 X 1	3-4.18	3450	1/3-1.5
SP11	78-104	40-68	1-1/2 xl-1/2	3.63-4.63	3450	1-2
SP15	99-120	59-90	1-1/2 X 1-1/2	4.25-5.13	3450	2-3
SP22	160-230	73-142	2x2 or 3x2	5-6.5	3450	5-10