Products

Chemkor Schedule 80 Fittings – SOCKET TEES

Main Image
  • Applicable pressure de-ratings at elevated temperatures apply. All Plastic Piping systems must be designed for potential Hydraulic Shock (water hammer), see Section 12, Engineering Data.
  • PVC Schedule 80 Fittings are produced in accordance with the following standards – ASTM D1784, ASTM D2467 (Soc Fittings), ASTM D2464 (Threaded Fittings).
  • Flanges are 150 lb. ANSI B16.5 dimensioned.
  • Threaded crosses, wyes, reducing wyes, 30° elbows, 22° elbows, threaded fittings, line couplings, repair couplings and many other fittings are available on request.
  • F indicates a fabricated fitting. F* Indicates moulded or fabricated available.
  • All 1/2″ – 16″ Molded flanges have a 150 psi Maximum Internal Pressure Rating@ 73° F (23°C).
  • All 10″ – 24″ Fabricated flanges have a 50 psi Maximum Internal Pressure Rating @ 73° F (23°C).
  • No provisions have been made for pressure surges, water hammer, or other conditions which should be considered.
  • All Socket Unions have a 235 psi Maximum Internal Pressure Rating @ 73° F (23°C).
  • Please note some brands are not interchangeable, please specify if you are requesting a specific brand.
NOMINAL PIPE SIZE PART NUMBER
SOCKET TEES
1/4 801002
3/8 801003
1/2 801005
3/4 801007
1 801010
1 1/4 801012
1 1/2 801015
2 801020
2 1/2 801025
3 801030
4 801040
5 801050
6 801060
8 801080
10 801 l00F*
12 801120F*
14 801140F
16 801160F
18 801180F
20 801200F
24 801240F
Documents
Technical Document

Request Quote

Sign Up