Chemkor Schedule 80 Fittings - 45° SOCKET ELBOWS

Products

Applicable pressure de-ratings at elevated temperatures apply. All Plastic Piping systems must be designed for potential Hydraulic Shock (water hammer), see Section 12, Engineering Data.
PVC Schedule 80 Fittings are produced in accordance with the following standards – ASTM D1784, ASTM D2467 (Soc Fittings), ASTM D2464 (Threaded Fittings).
Flanges are 150 lb. ANSI B16.5 dimensioned.
Threaded crosses, wyes, reducing wyes, 30° elbows, 22° elbows, threaded fittings, line couplings, repair couplings and many other fittings are available on request.
F indicates a fabricated fitting. F* Indicates moulded or fabricated available.
All 1/2″ – 16″ Molded flanges have a 150 psi Maximum Internal Pressure Rating@ 73° F (23°C).
All 10″ – 24″ Fabricated flanges have a 50 psi Maximum Internal Pressure Rating @ 73° F (23°C).
No provisions have been made for pressure surges, water hammer, or other conditions which should be considered.
All Socket Unions have a 235 psi Maximum Internal Pressure Rating @ 73° F (23°C).
Please note some brands are not interchangeable, please specify if you are requesting a specific brand.